11
TABLE 3
LED
Blinks
Switching
Time
LED
Blinks
Switching
Time
LED
Blinks
Switching
Time
LED
Blinks
Switching
Time
1 1s 9 9s 17 3,5m 25 5m
2 2s 10 10s 18 4m 26 6m
3 3s 11 30s 19 4,5m 27 7m
4 4s 12 60s 20 5m 28 8m
5 5s 13 1,5m 21 1m 29 9m
6 6s 14 2m 22 2m 30 10m
7 7s 15 2,5m 23 3m
8 8s 16 3m 24 4m
Technical Characteristics ONE2 WB/WI
Frequency
433,92 MHz
Power supply
21÷28 Vac
12÷28 Vdc
Range
Without antenna 30m
with antenna 100m
Channels
2
Relay contact
1A/24 Vdc
Working temperature
-20/+70°C
Consumption in standby
10 mA
Consum. ch. 1 or 2 actuated
42 mA
Consum.ch. 1 and 2 actuated
66 mA
Resetting the memory
Cut off the power to the receiver. Press and keep pressed the
button P. Restore the power keeping the button P pressed. The
LED will light up red, after 5 secs it will blink rapidly alternating
green-red, release the button. Wait for the LED to go out. The
memory is now completely erased.
To Next Page
Loading...