Need help?Do you have a question about the Beninca CALL and is the answer not in the manual?
General| Frequency | 433.92 MHz |
|---|---|
| Power supply | 12-24 V AC/DC |
| Memory | 64 codes |
| Operating Voltage | 12-24V DC |
| Operating Temperature | -20°C to +70°C |
Basic steps for installing and programming a new SIM in the CALL system.
Notes on password entry and phone number formatting to prevent system errors.
Instructions for connecting, powering on, and initializing the CALL system.
Procedure to reset the SIM card and restore default settings and password.
Explanation of LED indicators for monitoring the CALL system status.
How to set and change the access password for system programming and security.
Allows channel activation only by memorized telephone numbers for enhanced security.
Allows channel activation from any telephone without prior number storage.
Instructions on how to program system functions via SMS commands.
Procedure to add telephone numbers to the device's enabled list via SMS.
Command to modify access permissions and channel presets for registered numbers.
Command to remove one or more telephone numbers from the enabled list.
Command to retrieve general module status, including SMS count and network info.
Command to check presetting and permitted access for a specific number.
Command to list all memorized phone numbers stored in the device.
Command to reset the counter for sent SMS messages.
Command to modify the text of channel activation SMS messages.
Command to add a transmitter code to the receiver memory.
Command to disable a transmitter, removing its activation capability.
Command to check if a specific transmitter is enabled or disabled.
Command to block access to radio menu functions for entering new transmitters.
Command to reactivate access to radio menu functions for entering new transmitters.
Command to know the status of receiver outputs (activated or not).
List of potential error messages received via SMS and their causes.
Configuration and operation of the alarm function via GSM module.
Technical details and specifications of the four-channel radio receiver.
Guide to programming functions using the built-in LCD display.
To Next Page
