Beninca CALL User Manual

2) Manual typing in:
- remove the SIM from the CALL device and insert it in a mobile phone
- store the telephone numbers to be enabled in the SIM address book proceeding as follows:
in the user name eld type the telephone number to be memorised
in the telephone number eld, digit 0 or, if settings of channels are to be customized, the presetting 5-
digit string described in section “How to modify the permitted access of one or more numbers”.
HOW TO MODIFY THE PERMITTED ACCESS OF ONE OR MORE NUMBERS:
This command permits to modify the permitted access and presetting of one or more mobile phone num-
bers, or it permits or denies the possibility to activate some channels, change the combination call/channel
to be activated, call in the event of alarm.
modnum 123456 00000 3391234567,n°2,n°3,n°4...
where:
modnum command string
123456 access password
00000 string regarding channel presetting and permitted accesses to channels *
3391234567 enter the number the permitted access of which should be modied
n°2,n°3,n°4 more than one number can be modied by dividing them with “,”
* the string regarding channel presetting and permitted accesses to channels is composed of 5 digits:
Digit 1: activation with phone call:
“0” = denied access (the phone call activates no channel)
“1” = the phone call activates channel 1
“2” = the phone call activates channel 2
“3” = the phone call activates channel 3
“4” = the phone call activates channel 4
Digit 2: activation of channel 1 by SMS:
“0” = denied access (channel 1 cannot be activated through SMS)
“1” = channel 1 can be activated (through the sending of SMS1)
Digit 3: activation of channel 2 by SMS:
“0” = the phone call activates channel (channel 2 cannot be activated through SMS)
“1” = channel 2 can be activated ( (through the sending of SMS2)
Digit 4: activation of channel 3 by SMS:
“0” = denied access (channel 3 cannot be activated through SMS)
“1” = channel 3 can be activated (through the sending of SMS3)
Digit 5: activation of channel 4 by SMS:
“0” = denied access (channel 4 cannot be activated through SMS)
“1” = channel 4 can be activated (through the sending of SMS4)
If a number, which was not previously memorised, is entered in among the numbers typed in the odnum
command, this number will be added to the list with presetting and permitted access indicated in the com-
mand.
If a reply should be sent by the device, the command shall be:
?modnum 123456 000000 3391234567,n°2,n°3,n°4
The reply will be : “CONFIGURATION UPDATE OK”
REMOVE USER FROM LIST OF ENABLED PHONES:
This command permits to remove one or more numbers from memory.
delnum 123456 3391234567
where:
delnum command string
123456 access password
3391234567 telephone number to be removed from list
If a reply should be sent by the device, the command shall be:
?delnum 123456 3391234567
The reply will be: “USER DELETED”
6
7

Beninca CALL Specifications

General

Brand	Beninca
Model	CALL
Category	Receiver
Language	English