CARE & CLEANING
• Unplug the Base Unit from the main power supply
• Clean the Base Unit with a soft, damp cloth
• Do not use abrasive cleaning detergents
• Do not immerse the Base Unit in water
• Wipe dry with a soft cloth
• Do not clean any of the blender parts in a dishwasher
• Wash the Blending Jug, Grinding Mill and lids directly after use to
prevent food becoming hardened
• Add warm soapy water to the Blending Jug and run the blender for a
short time to assist with cleaning. Then remove the Blending Jug and
Lids and wash completely in warm soapy water
• Make sure that all parts are completely dry before reassembling and
storing the blender
7
Select the required speed by
turning the Speed Control Dial:
0: Off
1: Low Speed
2: Med/Low Speed
3: Med/High Speed
4: High Speed
WARNING:
THE BLADES ARE EXTREMELY SHARP.
USE CAUTION WHEN CLEANING THE BLADES.
PULSE:
To pulse the motor, press the
Pulse Button for short bursts of
no longer than 3 seconds at a
time.
To Next Page
Loading...
