What to do if steam is leaking around the lid of my Bennett Read 6L Pressure Chef?
If steam is leaking around the lid of your Bennett Read Kitchen Appliance, there are several possible causes. Make sure the seal gasket is correctly placed. Food may be stuck in the seal gasket, so try cleaning it. If the seal gasket is damaged, it will need to be replaced. Also, ensure that the lid is properly secured according to the directions.
Why is it difficult to open the lid of my Bennett Read 6L Pressure Chef Kitchen Appliances?
If the lid of your Bennett Read Kitchen Appliance is difficult to open, it might be because the floating valve hasn't dropped after pressure release. To resolve this, lift up the pressure regulator to release steam until the floating valve drops, then you should be able to turn the lid to open it.
What to do if steam is leaking around the floating valve on my Bennett Read 6L Pressure Chef Kitchen Appliances?
If steam is leaking around the floating valve of your Bennett Read Kitchen Appliance, it could be due to food stuck in the seal gasket of the floating valve, in which case you should clean the seal gasket. Alternatively, the seal gasket of the floating valve may be worn out and need to be replaced.
Why will the floating valve not rise in my Bennett Read 6L Pressure Chef Kitchen Appliances?
If the floating valve of your Bennett Read Kitchen Appliance will not rise, it could be due to too little food and water. Add food and water according to the directions. If there is still a leakage around the lid or pressure displaying valve, send to an authorized repair centre.
General| Capacity | 6 Litres |
|---|---|
| Presets | Rice, Yogurt |
| Safety Features | Overheat Protection |
| Display | Digital |
| Material | Stainless Steel (inner pot) |
| Functions | Pressure cooking, slow cooking, steaming, sautéing |
To Next Page
