EasyManua.ls Logo

Bennett Read BREP11 - Built-in Memory; Care & Cleaning; General Cleaning Instructions; Pressure Regulator & Seal Ring Cleaning

Bennett Read BREP11
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
BUILT-IN MEMORY
The SUPER CHEF 10 PLUS features convenient built-in memory. Should the power cut off suddenly
during the operation of your SUPER CHEF 10 PLUS, it will resume the last pre-programmed cooking
cycle when power restores.
CARE & CLEANING
1. Always unplug the SUPER CHEF 10 PLUS and let it cool down before cleaning
2. Only use a damp, soft cloth or sponge to wipe the SUPER CHEF 10 PLUS outer body (7). Do not
immerse or spray the SUPER CHEF 10 PLUS with any kind of liquid
3. Remove the drip cup (5) by gently pulling it outwards. Clean it with warm soapy water. Rinse and
dry thoroughly. Put the drip cup back by pushing it inwards
4. Take out the removable pot (6) and clean it with warm soapy water. Always use a sponge or soft
cloth to clean the removable pot. Do not use abrasive pot scourers that will damage the non-stick
coating
5. Clean the inner side of the lid with a soft, damp cloth
PRESSURE REGULATOR CLEANING INSTRUCTIONS:
Pull out the pressure regulator (2) to clean it
Clean out any food or dirt
Replace the pressure regulator by lining either dot on the pressure regulator with the dot on the
housing and rmly push down
SEAL RING CLEANING INSTRUCTIONS:
See instructions on page 5 for cleaning the seal ring and steam plate on the inner side of the lid.
Remove the seal ring and steam plate and clean them with warm soapy water. Be sure to dry them
completely and reassemble them correctly before placing back into the lid.
STORAGE
• Ensure that all parts are dry before storing
• Never store the appliance while it is still wet or dirty
• Store the appliance in its box in a clean, dry place
• Never wrap the power cord around the appliance

Related product manuals