English
Using the Camera18
3.7.9 Setting the photo effect
You can add special effects to your images in the capture or playback mode.
3.7.10 Setting the date stamp
The Date Stamp function can be used to add a date to your pictures as you take them.
3.7.11 Setting S.S.F. (Stabilizer)
With more sensibility and faster shutter speed to brighten up the pictures, effectively
preventing blurred images caused by hand shaking or target movement, one can take good
pictures with little effort.
• S.S.F. (Stabilizer) is not available in the Fireworks / Movie / Voice REC scene modes.
3.7.12 Setting face tracking
1. Turn on [Face Tracking] from the menu in the capture mode.
2. Aim the lens at the subject(s). One or several white frames show on the screen focusing
on the subjects, depending on the number of subjects detected by the camera (C1060:
max. 8 faces; C850: max. 5 faces).
3. Press the shutter halfway to set automatic focus.
4. Wait until the frames turn green, and press the shutter down.
3.7.13 Setting photo frame
You can add 10 kinds of frames to still images, making them more interesting.
Icon Description
Normal No effect is added to the image. (capture mode only)
Remove
Red Eye
Tries to reduce the red eye effect. (for a still image in the playback mode only)
B&W Convert the image to black & white.
Sepia The captured image will be stored in a sepia tone.
Negative Colors become the opposite of what they were in the original image.
Mosaic Applies a mosaic tile effect to an image.
Red The image becomes reddish.
Green The image becomes greenish.
Blue The image becomes bluish.
DC_C1060_C850_UM CD EN.book Page 18 Thursday, September 18, 2008 9:12 AM
To Next Page
Loading...
