11 How to assemble your monitor hardware
To remove the headphone hook:
I. Point your finger into the small hole on the hook base.
II. Lift the hook.
8. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on the
right of the monitor.
Turn on the computer too, and follow the instructions in
Section 4:
Getting the most from your BenQ monitor
on page 13
to install the monitor software.
To Next Page
Loading...
