BenQ FP222WH - Specifications

36 Specifications
11. Specifications
Model FP222W H
Display type
Viewable diagonal
Native (maximum) resolution
Colors
Contrast / Brightness
Response time
Viewing angle (left/right, up/down)
22.0”, active, TFT
558.68 mm
1,680 x 1,050
16.7 million
700:1 / 300 cd/m
2
5 ms
170, 160 (CR>
10)
Line frequency
Image frequency
30 - 82 kHz Multi- frequency monitor
56 - 76 Hz modes within these parameters
Image diagnostics
Controls
Functions
Digital, OSD Technology,
i key (automatic image
setting)
7 buttons and i key.
Contrast, brightness, vert. & hor. image position,
phase, pixel clock, color balance, color palette,
picture mode, Senseye demo, multiple-language
OSD, OSD position, OSD lock, DDC/CI*, input
selection
Power management
Max. power consumption
Standby power consumption
VESA DPMS, EPA
< 49 Watt
< 1 Watt, 120 V
<
2 Watt, 240 V
Input signal
PC
Synchronization
RGB analog 0.7 Vpp/75 Ohm positive
Digital: DVI-D, HDMI* (optional)
TTL separate signal connection 15-pin mini D-sub
cable
Temperature (operating)
Air humidity (operating)
0 °C - 40 °C
10% - 90%
Certifications TCO 03, TÜV/Ergonomics, TÜV/GS, FCC Class
B, ISO 13406-2, VCCI, CB Report, CE, C-Tick,
BSMI, Fimko, GOST, CSA, CCC, MIC