15 How to adjust the screen resolution
5. How to adjust the screen resolution
Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always fixed.
The best possible picture for your FP95G is achieved with a resolution of 1280 x 1024. This is
called “Native Resolution” or maximal resolution – that is, the clearest picture. Lower resolutions
are displayed on a full screen through an interpolation circuit. Image blurring across pixel
boundaries can occur with the interpolated resolution depending upon the image type and its
initial resolution.
To take full advantage of LCD technology you should select the native resolution setting of 1280 x 1024 on
your PC screen resolution setting.
1. Open Display Properties and select the Settings tab.
You can op en Display Properties by right-clicking on the Windows desktop and selecting Properties
from the pop-up menu.
2. Use the slider in the ‘Screen area’ section to adjust the screen resolution.
Select the recommended resolution of 1280 x 1024 then click Apply.
If you select some other resolution, be aware that this other resolution is interpolated and may not
accurately display the screen image as well as it could do at the native resolution setting.
3. Click OK then Ye s .
4. Close the Display Properties window.
To Next Page
Loading...
Need help?
General
