BenQ FP95G - Specifications

34 Specifications
11. Specifications
Model FP95G
Display type
Viewable diagonal
Native (maximum) resolution
Colors
Contrast / Brightness
Response time
Viewing angle (left/right, up/down)
19.0” , active, TFT
480 mm
1,280 x 1024
16.7 million
800:1 / 300 cd/m
2
5 ms
160, 160 (CR>
10)
Line frequency
Image frequency
31 - 83 kHz Multi- frequency monitor
56 - 76 Hz modes within these parameters
Image diagnostics
Controls
Functions
Digital, OSD Technology, i key (automatic image
setting)
5 buttons and i key.
Contrast, brightness, vert. & hor. image position,
phase, pixel clock, color balance, color palette,
multiple-language OSD, OSD position, status
indicator, input selection, picture mode, Senseye
demo
Power management
Max. power consumption
Power saving mode
VESA DPMS, EPA
40 Watt
< 1 Watt
Input signal
Synchronization
RGB analog 0.7 Vpp/75 Ohm positive
Digital: DVI-D (optional)
TTL separate signal connection 15-pin mini D-sub
cable
Temperature (operating)
Air humidity (operating)
0 °C - 40 °C
10% - 90%
Certifications TCO 03, TÜV/Ergonomics, TÜV/ GS, FCC Class
B, VCCI, CB Report, CE, C-Tick, Fimko, GOST,
MIC, EPA, CCC, BSMI, GS, Green Mark, CSA,
SASO, PSB