BenQ GL2055 Product Service Manual

- 21 -
found in accessories packed with the product as connecting cables, plugs, adapters and
the like, and being inspected as a part of the complete product, must be included in the
evaluation.
The evaluation must be within the limits of the product specification and, for not specified
characteristics, be related to the design model, limit samples or judgment of a jury of
experts.
3.2.10. TEST CONDITIONS
Unless otherwise prescribed, the test conditions are as follows:
. Nominal mains voltage
. Temperature: +5~+35℃
. Warm up time : 30minutes minimum .
. Visual inspection shall be down with the distance from eyes to the sample 35-50 cm .
. Display mode: Primary mode 1366*768
3.2.11. TEST EQUIPMENTS
1. PC with display adapter or other specific
display adapter which is agreed upon by both parties
2. Test program by BenQ
3. Ruler
4. Power saving test tool
5. Minolta color analyzer ( CA-110 or BM – 7 )
3.2.12. VISUAL INSPECTION CRITERIA
1. PACKING
2. ACCESSORIES
3. APPEARANCE
4. AC POWER AND SIGNAL CABLE
5. INTERIOR OF THE PRODUCT
No
Description
Class
1
Packing
1.1
Wrong packing material
Major
1.2
Carton damaged(over 6cm dia).wet, badly taped or stapled, product will not arrive
in good condition at customer
Minor
1.3
Carton damaged(3cm to 6cm dia), badly taped or stapled , product will arrive in
good condition at customer
Minor
1.4
Wrong marking of trade mark
Major

BenQ GL2055 Specifications

General

Brand	BenQ
Model	GL2055
Category	Monitor
Language	English