BenQ LX810STD - Page 44

Operation44
Function Description
Network
Settings
Wired LAN
See BenQ Network Projector Operation Guide for details.
AMX Device Discovery
When AMX Device Discovery is On, the projector can be detected
by AMX controller.
MAC Address
Displays the mac address for this projector.
The System limitation of 1:1 audio is Intel Pentium 4, 3.0G CPU, 1G RAM.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Projector Installation,
High Altitude Mode, Security Settings, DHCP, Baud Rate.
Current
System
Status
Source
Shows the current signal source.
Light Source Mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
3D Format
Shows the current 3D mode.
Color System
Shows input system format.
Light Source Usage Time
Displays the number of hours the light source has been used.
Firmware Version
Shows the firmware version of your projector.
5. SYSTEM SETUP: Advanced menu
6. INFORMATION menu