32 Menu operation
System
Language Sets the language for the On-Screen Display (OSD) menus.
Standby
Settings
• Monitor Out: Allows the projector to output a VGA signal when it is in standby
mode and the PC jack and the MONITOR OUT jack are correctly connected to
devices.
• Audio Pass Through: The projector can play sound when it is in standby mode
and the corresponding jacks are correctly connected to devices. Press / to
choose the source that you wish to use. See Connection on page 17 for how to
make the connection.
Background
Settings
• Background: Sets the background color for the projector.
• Splash Screen: Allows you to select which logo screen will be displayed during
projector start-up.
Menu Settings
• Menu Type: Switches to the Basic OSD menu.
• Menu Display Time: Sets the length of time the OSD will remain active after
your last key press.
Audio
Settings
• Mute: Temporarily turns off the sound.
• Volume: Adjusts the sound level.
• Power On/Off Ring Tone: Turns on or off the ring tone when the projector is
in startup and shutdown process.
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power On/Off Ring Tone.
Closed
Caption
• Closed Caption Enable: Activates the function by selecting On when the
selected input signal carries closed captions.
Captions: An on-screen display of the dialogue, narration, and sound effects of TV programs and
videos that are closed captioned (usually marked as "CC" in TV listings).
• Caption Version: Selects a preferred closed captioning mode. To view captions,
select CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language
in your area).
Factory
Default
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Projector Installation, Lamp Timer, High
Altitude Mode, Security Settings, Baud Rate, HDMI Equalizer.
Reset System
Returns all of the adjustments you’ve made for the System menu to the factory
preset values.
To Next Page
Loading...
