How to fix BenQ MX618ST Projector that does not turn on?
If your BenQ Projector doesn't turn on, first ensure the power cord is securely plugged into both the projector's AC power jack and a working power outlet, checking that the outlet switch is on. Also, if the projector is cooling down, wait for the process to complete before attempting to power it on again.
What to do if my BenQ MX618ST has no picture?
If you have no picture on your BenQ Projector, make sure the video source is turned on and correctly connected. Check the connection between the projector and the input signal device. Select the correct input signal using the SOURCE key on the projector or remote control. Finally, ensure the lens cover is open.
How to fix blurred image on BenQ Projector?
If you're experiencing a blurred image with your BenQ Projector, try these steps: 1. Adjust the focus of the lens using the focus ring. 2. Adjust the projection angle, direction, and height of the projector to properly align it with the screen. 3. Ensure the lens cover is open.
Why does not BenQ MX618ST remote control work?
If the remote control for your BenQ Projector isn't working, try the following: * Replace the battery with new ones. * Remove any obstacles between the remote control and the projector. * Ensure you are within 8 meters (26 feet) of the projector.
General| Resolution | XGA (1024 x 768) |
|---|---|
| Brightness | 3000 ANSI Lumens |
| Contrast Ratio | 13000:1 |
| Weight | 2.6 kg |
| Keystone Correction | Vertical: ±40 degrees |
| Lamp Life | 4000 hours (Normal mode), 6000 hours (Economic mode) |
| Zoom Ratio | 1.2:1 |
| Input Connectors | HDMI, VGA, Composite Video, USB (Type A) |
| Noise Level | 29 dB (Eco Mode) |
| Aspect Ratio | 4:3 (Native), 16:9 (Compatible) |
Guides on powering on, basic menu navigation, and signal search.
Covers image angle, keystone correction, zoom, aspect ratio, and image freezing.
Covers cable locks, password setup, recall, and disabling.
Details switching input signals and adjusting color space.
Provides instructions for powering down and disconnecting the projector.
Covers general care, cleaning the lens, and cleaning the projector case.
Explains lamp hours, modes, auto power off, and extending lamp life.
Alerts users when the projector lamp needs replacement and displays warning messages.
Provides a step-by-step guide on how to safely replace the projector lamp.
Explains how to reset the projector's lamp timer after replacing the lamp.
Addresses issues like no power, no picture, blurred image, remote control, and password errors.
To Next Page
