How to fix a BenQ Projector that does not turn on?
If your BenQ Projector is not turning on, check the following: - Ensure the power cord is securely plugged into both the projector's AC power jack and the power outlet. Also, verify that the power outlet switch is turned on, if applicable. - If you've recently turned the projector off, wait until the cooling down process is complete before attempting to turn it on again.
What to do if my BenQ MX703 Projector has no picture?
If your BenQ Projector shows no picture, there might be several reasons. First, ensure that your video source is turned on and properly connected. Second, verify the connection between the projector and the input signal device. Third, select the correct input signal using the SOURCE key on the projector or remote. Finally, make sure the lens cover is open.
Why is my BenQ Projector remote control not working?
If the remote control for your BenQ Projector isn't working, try these steps: First, replace the batteries with new ones. Second, make sure there is nothing blocking the path between the remote and the projector. Third, ensure you are within 8 meters (26 feet) of the projector.
Why is the image on my BenQ MX703 blurred?
If your BenQ Projector image is blurred: - Adjust the focus of the lens using the focus ring. - Adjust the projection angle, direction, and height of the projector to properly align it with the screen. - Ensure the lens cover is open.
To Next Page
General
