How to fix BenQ MX704 that does not turn on?
If your BenQ Projector does not turn on, ensure the power cord is securely plugged into both the projector's AC power jack and a functioning power outlet. If the outlet has a switch, make sure it's on. Also, if you've recently turned the projector off, wait for the cooling process to complete before attempting to turn it on again.
Why doesn't my BenQ MX704 Projector remote control work?
If the remote control for your BenQ Projector isn't working, first, replace the batteries with new ones. Second, make sure there are no obstructions between the remote and the projector. Lastly, ensure you are within 8 meters (26 feet) of the projector.
What to do if my BenQ MX704 has no picture?
If your BenQ Projector displays no picture, there are several potential causes. First, ensure that your video source is both turned on and correctly connected. Next, verify that the projector is properly connected to the input signal device. Also, make sure you have selected the correct input signal using the SOURCE key on either the projector itself or the remote control. Finally, check that the lens cover is open.
How to fix blurred image on BenQ MX704?
If your BenQ Projector image is blurred, try the following: First, adjust the focus of the lens using the focus ring. Second, adjust the projection angle, direction, and height of the projector to properly align it with the screen. Finally, make sure the lens cover is open.
General| Brightness | 4000 ANSI Lumens |
|---|---|
| Resolution | XGA (1024 x 768) |
| Display Technology | DLP |
| Zoom Ratio | 1.1x |
| Keystone Correction | Vertical ±40° |
| I/O Ports | HDMI |
| Noise Level | 29 dB (Eco) |
| Lamp Life | 4000 hours (Normal), 6000 hours (Eco) |
General safety precautions and warnings for operating the projector.
Recommendations and safety precautions for mounting the projector on a ceiling.
Explanation of the projector's physical buttons and indicator lights.
Description of the functions of buttons on the projector's remote control.
Guidance on selecting an appropriate installation site for the projector.
Instructions and diagrams for connecting various video and audio sources to the projector.
Step-by-step guide for powering on and initial setup of the projector.
Using security cables and setting up password protection.
Checking lamp hours, extending lamp life, and replacing the lamp.
Common projector problems and their solutions, including power, picture, focus, remote, and password issues.
To Next Page
