BenQ MX726 User Manual (English)

Other manuals for BenQ MX726

Questions and Answers:

V
Victor CameronAug 8, 2025
Why won't my BenQ MX726 turn on?
- B
  barnetttroyAug 8, 2025
  If your BenQ Projector isn't turning on, consider the following possibilities: * **Power Supply**: Ensure the power cord is securely plugged into both the projector's AC inlet and a functioning power outlet. If the outlet has a switch, make sure it's switched on. * **Cooling Process**: If you've recently turned the projector off, it might be in the cooling process. Wait until this process is complete before attempting to turn it on again.
A
Anne StephensAug 13, 2025
What to do if the BenQ Projector remote control does not work?
- T
  Thomas SandersAug 13, 2025
  If your BenQ Projector's remote control isn't working, try these solutions: * **Battery**: Replace the battery with a new one. * **Obstacles**: Remove any obstacles between the remote control and the projector. * **Distance**: Ensure you are within 7 meters (23 feet) of the projector.
A
Anna FerrellAug 18, 2025
How to fix a BenQ MX726 that does not turn on?
- C
  Courtney HowellAug 18, 2025
  If your BenQ Projector isn't turning on, consider these potential causes: * **Power Supply**: Ensure the power cord is securely plugged into both the projector's AC inlet and a working power outlet. If the outlet has a switch, make sure it's turned on. * **Cooling Process**: If you've recently turned the projector off, it might be in a cooling process. Wait until this process is complete before attempting to turn it on again.
C
Christopher BurchAug 25, 2025
What to do if my BenQ MX726 has no picture?
- R
  Rachel SmithAug 25, 2025
  If your BenQ Projector isn't displaying a picture, here are a few things to check: * Ensure the video source is turned on and properly connected with the signal cable. * Verify that the projector is correctly connected to the input signal device. * Select the correct input signal using the SOURCE key on the projector or remote control.
D
dguzmanAug 29, 2025
How to fix a blurred image on my BenQ MX726 Projector?
- K
  Karen GriffithAug 29, 2025
  To correct a blurred image on your BenQ Projector, try these steps: 1. **Focus Adjustment:** Use the focus ring to adjust the lens until the image is clear. 2. **Alignment:** Ensure the projector and screen are properly aligned. Adjust the projection angle, direction, and height of the projector as needed. 3. **Lens Cover:** Verify that the lens cover is open.
L
Lisa JohnsonSep 2, 2025
Why is the image on my BenQ MX726 Projector blurred?
- H
  Heather KingSep 3, 2025
  A blurred image on your BenQ Projector can be due to several reasons: * **Focus**: The projection lens may not be correctly focused. Adjust the focus using the focus ring. * **Alignment**: The projector and screen might not be aligned properly. Adjust the projection angle, direction, and height of the unit as needed. * **Lens Cover**: Ensure the lens cover is open.

BenQ MX726 Specifications

General

Brightness	4000 ANSI Lumens
Resolution	XGA (1024 x 768)
Display Technology	DLP
Aspect Ratio	4:3 (Native), 16:9 (Compatible)
Zoom Ratio	1.1x
Connectivity	HDMI, VGA, USB, RS-232
Noise Level	29 dB (Eco)
Keystone Correction	Vertical: ± 40 degrees
Operating Temperature	0 - 40 °C
Lamp Life	4000/10000 hours (Normal/Eco mode)