Operation 29
Using the menus
The projector is equipped with On-Screen Display (OSD) menus for making various
adjustments and settings.
Below is the overview of the OSD menu.
To use the OSD menus, please set them to your familiar language first.
1. Press MODE/ENTER on the projector or
remote control to turn the OSD menu on.
3. Press ▼ to highlight Language
and press ◄/► to select a
preferred language.
2. Use ◄/► to highlight the System Setup:
Basic menu.
4. Press MODE/ENTER twice* on
the projector or remote control
to leave and save the settings.
*The first press leads you back to the
main menu and the second press
closes the OSD menu.
Current input
signal
Main menu icon
Main menu
Sub-menu
Highlight
Press MENU/
EXIT to the
previous page
or to exit.
Status
Downloaded From projector-manual.com BenQ Manuals
To Next Page
Loading...
