Operation 49
5.
System
Setup:
Advanced
High Altitude
Mode
On/Off
Audio Settings Mute On/Off
Volume
Microphone
Volume
Power on/off Ring On/Off
Lamp Settings
Lamp Mode Normal/Economic/SmartEco
Reset Lamp Timer Yes/No
Equivalent Lamp
Hour
Security Setting
Change Passward
Change Security
Settings
Power On Lock On/Off
Web Control Lock On/Off
Baud Rate
2400/4800/9600/14400/19200/
38400/57600/1152000
Test Pattern On/Off
Closed Caption
Closed Caption
Enable
On/Off
Caption Version CC1 / CC2 / CC3 / CC4
Standby Settings
Network
Enable Network Standby Mode
Auto Disable Network Standby
Mode
Microphone On/Off
Monitor Out On/Off
Audio Pass
Through
On/Off
MHL Charging On/Off
Network settings
Wired LAN
Status
DHCP
IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
Projection Login
Code
On/Off
AMX Device
Discovery
On/Off
Mac Address
Reset All Settings Reset / Cancel
Main menu Sub-menu Options
Downloaded From projector-manual.com BenQ Manuals
To Next Page
Loading...
