BenQ MX726 - Projector Specifications

Specifications68
Specifications
Projector specifications
All specifications are subject to change without notice.
Optical
Resolution
MX726
1024 x 768
MW727
1280 x 800
Display system
Single-chip DLP™ system
Lens F/Number
F=2.59 to 2.91, f=16.87 to 21.87mm
Lamp
280W lamp
Electrical
Power supply
AC100-240V
50-60 Hz (Automatic)
3.9A
Power consumption
390W (Max); < 0.5W (Standby)
Mechanical
Weight
7.28 lbs (3.3 Kg)
Output terminals
Speaker
(Mono) 10 watt x 1
Audio signal output
PC audio jack x 1
Monitor Out
D-Sub 15-pin (female) x1
USB
TYPE-A (5V/1.5A)
Control
USB
MINI-B
RS-232 serial control
9 pin x 1
IR receiver x 2
12V TRIGGER
12VDC (Max. 0.5 A) x 1
LAN control
RJ45 x 1
Input terminals
Computer input
RGB input
D-Sub 15-pin (female) x 2
Video signal input
S-VIDEO
Mini DIN 4-pin port x 1
VIDEO
RCA jack x 1
SD/HDTV signal input
Digital - HDMI-2 x 1
Digital - HDMI-1/MHL x 1
Audio signal input
Audio in
PC audio jack x 1
RCA audio jack (L/R) x 1
MIC
PC audio jack x 1
Environmental Requirements
Operating temperature
0°C–40°C at sea level
Operating relative humidity
10%–90% (without condensation)
Operating altitude
0–1499 m at 0°C–35°C
1500–3000 m at 0°C–30°C (with
High Altitude Mode on)
Downloaded From projector-manual.com BenQ Manuals