How to improve brightness on BenQ Projector?
If you're experiencing brightness issues with your BenQ Projector, a possible solution is to replace the lamp. Also, verify the overfill size and, if it's too large, reinstall SL and AL to ensure they are correctly positioned.
How to fix focus issues on BenQ PB6100?
To address focus issues with your BenQ Projector, consider changing the projection lens. Additionally, you might try putting a shim metal between the upper side of the DMD and the DMD datum.
How to clean dust inside BenQ PB6100 Projector?
If you notice dust issues with your BenQ Projector, cleaning the DMD might help.
How to improve FOFO contrast on BenQ Projector?
If you're experiencing issues with the FOFO contrast on your BenQ Projector, try cleaning the DMD and PL.
How to improve ANSI contrast on BenQ PB6100?
If you're experiencing issues with ANSI contrast on your BenQ Projector, try cleaning the PL and DMD. If that doesn't resolve the issue, consider changing the PL.
How to adjust color on BenQ PB6100 Projector?
If you're experiencing color issues with your BenQ Projector, check the CW 50% point and replace the CW if necessary.
What to do if my BenQ PB6100 Projector has horizontal or vertical strips?
If you notice horizontal or vertical strips on your BenQ Projector, you can try the following: * Check the connector between the FPC and the M/B. * Re-install the DMD with FPC. * Check if any pin of C-Spring is missing or damaged. * Replace the FPC/C-Spring with a new one. * Replace the DMD with a new one.
How to remove blue edge from BenQ Projector?
If you're seeing a blue edge on your BenQ Projector's display, try readjusting the LP, ensuring the LP end is touching the DMD_HSG Datum. Also, inspect the LP for damage; if it's crushed, replace it with a new one.
What causes blue or purple border on BenQ PB6100?
If you observe a blue or purple border on your BenQ Projector's display, try re-installing the SL and AL to ensure they are in the correct position. Also, check the FM installation.
What causes pixel failure on BenQ PB6100?
If you're encountering pixel failure on your BenQ Projector, a solution is to replace the DMD with a new one.
General| Projection distance | - m |
|---|---|
| Projection technology | - |
| Screen size compatibility | - \ |
| Projector native resolution | XGA (1024x768) |
| Weight (imperial) | 5.8 lbs |
| Dimensions (WxDxH) | 262 x 215.5 x 98.4 mm |
| Power requirements | 100 - 240 V CA |
| Focal length range | 23 - 26 mm |
| Lamp power | 200 W |
| Light source type | Lamp |
| Service life of light source | - h |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN | No |
| Ethernet LAN (RJ-45) ports | 0 |
| Power consumption (standby) | - W |
| Power consumption (typical) | 285 W |
| Noise level | - dB |
| Operating temperature (T-T) | 0 - 40 °C |
Weight and Dimensions| Weight | 2600 g |
|---|
To Next Page
