To Next Page
T
Timothy BairdAug 15, 2025
How to focus the lens on a BenQ PB8250 Projector?
- MMaria RiveraAug 16, 2025
If your BenQ Projector's projection lens is not correctly focused, adjust the focus of the lens using the focus ring.
How to focus the lens on a BenQ PB8250 Projector?
If your BenQ Projector's projection lens is not correctly focused, adjust the focus of the lens using the focus ring.
What to do if BenQ PB8250 is not correctly connected to the input source device?
If your BenQ Projector is not correctly connected to the input source device, check the connection.
How to select the correct input signal on a BenQ PB8250?
If the input signal has not been correctly selected on your BenQ Projector, select the correct input signal with the Source key on the projector or remote control.
What to do if the video source is not turned on or connected correctly to my BenQ Projector?
If the video source is not turned on or connected correctly to your BenQ Projector, turn the video source on and check that the signal cable is connected correctly.
How to align BenQ PB8250 with the screen?
If your BenQ Projector and the screen are not aligned properly, adjust the projection angle and direction as well as the height of the unit if necessary.
Why isn't my BenQ PB8250 Projector remote working from far away?
If the remote control for your BenQ Projector isn't working because you are too far away from the projector, stand within 6 meters (19.5 feet) of the projector.
What to do if there is an obstacle between my BenQ PB8250 and the remote control?
If the remote control for your BenQ Projector isn't working because there is an obstacle between the remote control and the projector, remove the obstacle.
What to do if the lens cap is still attached to the lens of BenQ PB8250?
If the lens cap is still attached to the lens of your BenQ Projector, remove the lens cap.
Why is my BenQ PB8250 remote not working? (batteries)
If the remote control for your BenQ Projector isn't working because the batteries are out of power, replace both of the batteries with new ones.
What to do if attempting to turn the BenQ PB8250 on again during the cooling process?
If you are attempting to turn the BenQ Projector on again during the cooling process, wait until the cooling down process has completed.
General| Brightness | 2500 ANSI Lumens |
|---|---|
| Resolution | 1024 x 768 (XGA) |
| Contrast Ratio | 2000:1 |
| Display Technology | DLP |
| Projection Distance | 1.2 - 10 m |
| Screen Size | 300 inches |
| Inputs | S-Video, Composite Video |
