9 Safety, regulatory and legal information
Moisture condensation
Never operate the projector immediately after moving it from a cold location to a hot location. When the
projector is exposed to such a change in temperature, moisture may condense on the crucial internal parts. To
prevent the projector from possible damage, do not use the projector for at least 2 hours after a sudden change
in temperature.
Avoid using volatile liquids
Do not use volatile liquids, such as insecticide or some types of cleaner, near the projector. Do not leave rubber
or plastic products touching the projector for a long time. They will leave marks on the finish. When cleaning,
be sure to follow the cleaning product’s safety instructions.
Disposal
This product contains the following materials which are harmful to humans and the environment.
• Lead, which is contained in solder.
• Mercury, which is used in the lamp.
To properly dispose of the product or used lamps, consult your local environmental authority for advice.
To Next Page
