BenQ TH585P - Password Management; Password Errors and Recall Procedure; Changing and Disabling Password

23 Operation
If you forget the password
If you enter the wrong password, the password error message will appear, and the Input Current
Password message follows. If you absolutely do not remember the password, you can use the
password recall procedure. See
Entering the password recall procedure on page 23.
If you enter an incorrect password 5 times in succession, the projector will automatically shut down in a
short time.
Entering the password recall procedure
1. Press and hold AUTO for 3 seconds. The projector will display a coded number on the screen.
2. Write down the number and turn off your projector.
3. Seek help from the local BenQ service center to decode the number. You may be required to
provide proof of purchase documentation to verify that you are an authorized user of the
projector.
Changing the password
1. Go to Advanced Menu - System Setup : Advanced > Password. Press OK. The Password
page appears.
2. Highlight Change Password and press OK. The message “Input Current Password” appears.
3. Enter the old password.
• If the password is correct, another message “Input New Password” appears.
• If the password is incorrect, the password error message will appear, and the message “Input Current Password”
appears for your retry. You can press BACK to cancel the change or try another password.
4. Enter a new password.
5. Confirm the new password by re-entering the new password.
Disabling the password function
To disable password protection, go to Advanced Menu - System Setup : Advanced > Password >
Power On Lock and press / to select Off. The message “Input Current Password” appears.
Enter the current password.
• If the password is correct, the OSD menu returns to the Security Settings page. You will not
have to enter the password next time turning on the projector.
• Under the Advanced OSD menu • Under the Basic OSD menu
• Under the Advanced OSD menu • Under the Basic OSD menu
Password Error
Please try again.
Password Error
Please try again.
Please write down the recall code,
and contact BenQ
Customer Center.
Recall code:
XXX XXX XXX XXX
Recall Password
Exit
Recall Password
XXX XXX XXX XXX
Please write down the recall code, and contact
BenQ Customer Center.
Recall code: