Need help?Do you have a question about the BenQ TH681 and is the answer not in the manual?
General| Number of colors | 1.073 billion colors |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | - m |
| Vertical scan range | 23 - 120 Hz |
| Horizontal scan range | 15 - 102 kHz |
| Projection technology | DLP |
| Supported aspect ratios | - |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | 45 - 300 \ |
| Projector native resolution | 1080p (1920x1080) |
| Keystone correction, vertical | -40 - 40 ° |
| Throw ratio | 1.15 - 1.5:1 |
| Focal length range | 16.88 - 21.88 mm |
| Aperture range (F-F) | 2.59 - 2.87 |
| Lamps quantity | 1 lamp(s) |
| Service life of light source | 4000 h |
| Service life of light source (economic mode) | 6500 h |
| Full HD | Yes |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC, PAL, SECAM |
| Supported graphics resolutions | 1600 x 1200 (UXGA), 640 x 480 (VGA) |
| DVI port | No |
| USB connector type | Mini-USB B, USB Type-A |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 2 |
| VGA (D-Sub) ports quantity | 3 |
| Component video (YPbPr/YCbCr) in | 0 |
| Noise level | 33 dB |
| Preset modes | Cinema, Custom, Dynamic, Presentation, sRGB |
| Noise level (economic mode) | 28 dB |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | Black, White |
| Market positioning | Home cinema |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 270 W |
| Cables included | VGA |
| Remote control type | IR |
Weight and Dimensions| Depth | 244.12 mm |
|---|---|
| Width | 311.81 mm |
| Height | 104.7 mm |
| Weight | 2600 g |
Crucial guidelines for safe operation, installation, and handling of the projector to prevent hazards, including specific advice for ceiling mounting.
Description of buttons, indicator lights (POWER, TEMP, LAMP), and rings (Focus, Zoom) located directly on the projector unit.
Detailed explanation of each button on the remote control, covering power, menu navigation, source selection, and special functions.
Diagrams and instructions for connecting various video and audio devices, including cable types and connection points.
Instructions for powering on the projector, initial language selection, password entry, and signal detection.
Procedures for adjusting projection angle, auto-image tuning, image size (zoom), and clarity (focus for sharp images).
Instructions for securing the projector with a cable lock and setting up a password to prevent unauthorized access.
Procedures for managing the projector password, including steps for forgetting, recalling, and changing the password.
Step-by-step instructions for safely shutting down the projector, including cooling procedures and direct power off options.
Information about lamp hour calculation, extending lamp life through mode selection, and indicators for when to replace the lamp.
Detailed instructions and safety precautions for safely removing the old lamp and installing a new projector lamp unit.
Solutions for frequent projector malfunctions such as power failure, no picture, blurred image, remote control issues, and password errors.
To Next Page
