42 Maintenance
Extending lamp life
• Setting the Light Mode
Go to Advanced Menu - Picture > Advanced > Light Mode, press OK. The Light Mode page
appears.
Setting the projector in Economic, SmartEco or LampSave mode extends lamp life.
• Setting Auto Power Off
This function allows the projector to turn off automatically if no input signal is detected after a set
period of time to prevent unnecessary waste of lamp life.
To s e t Auto Power Off, go to Advanced Menu - System Setup : Basic > Auto Off and press
/.
Timing of replacing the lamp
When the LIGHT indicator lights up or a message appears suggesting it is time to replace the lamp,
please consult your dealer or go to http://www.BenQ.com before installing a new lamp. An old lamp
may cause a malfunction in the projector and in some instances the light may explode.
The following Lamp warning displays will remind you to change the lamp.
Light Mode Description
Normal Provides full lamp brightness
Economic Lowers brightness to extend the lamp life and decreases the fan noise
SmartEco
Adjusts the lamp power automatically depending on the content brightness level while
optimizing display quality
LampSave
Adjusts the lamp power automatically depending on the content brightness level while
offering a longer lamp life
• The apparent brightness of the projected image will vary depending on the ambient lighting conditions, selected
input signal contrast/brightness settings, and is directly proportional to projection distance.
• The lamp brightness will decline over time and may vary within the lamp manufacturers specifications. This is
normal and expected behavior.
• The LIGHT indicator light and TEMPerature warning light will light up if the lamp becomes too hot. Turn
the power off and let the projector cool for 45 minutes. If the Light or Temp indicator still lights up after
turning the power back on, please contact your dealer. See Indicators on page 46.
Install a new lamp for optimal performance. Press OK to
dismiss the message.
It is strongly recommended that you replace the lamp at this
age. The lamp is a consumable item. The lamp brightness
diminishes with use. This is normal lamp behavior. You can
replace the lamp whenever you notice that the brightness level
has significantly diminished.
Press
OK to dismiss the message.
Order Replacement Lamp
Lamp>XXXX Hours
Order a new lamp at www.benq.com
OK
OK
Replace Lamp Soon
Lamp>XXXX Hours
Order a new lamp at www.benq.com
To Next Page
Loading...
