BenQ TK850 - Specifications; Projector Specifications

39 Specifications
Specifications
Projector specifications
All specifications are subject to change without notice.
Optical
Resolution
3840 x 2160 with XPR
1920 x 1080 without XPR
Display system
1-CHIP DMD
Lens
F = 1.9 ~ 2.47, f = 12 ~ 15.6 mm
Clear focus range
1.2m ~ 5.1m @ Wide,
1.3m ~ 4.9m @ Tele
Lamp
245 W lamp
Zoom ratio
1.3X
Electrical
Power supply
AC100–240V, 3.4 A, 50–60 Hz (Automatic)
Power consumption
350 W (Max); 0.5 W (Standby)
Mechanical
Weight
4.2 Kg +
200 g (9.3 lbs + 0.44 lbs)
Output terminals
Speaker
5 watt x 2
Audio signal output
PC audio jack x 1
SPDIF to optical x 1
Control
USB
Type-A (USB 3.0) x 1: Media reader/drive,
Firmware download (5V 1.5A)
Type-A (USB 2.0) x 1: Power supply (5V, 2.5A)
Mini-B x 1
12V DC x 1: Trigger for screen control
RS-232 serial control
9 pin x 1
IR receiver x 2
Input terminals
Video signal input
HDMI (2.0b, HDCP 2.2) x 2
Environmental Requirements
Operating temperature
0°C–40°C at sea level
Operating relative humidity
10%–90% (without condensation)
Operating altitude
0–1499 m at 0°C–35°C
1500–3000 m at 0°C–30°C (with
High Altitude Mode on)
Storage temperature
-20°C–60°C at sea level
Storage humidity
10%–90% RH (without condensation)
Storage altitude
30°C@ 0~12,200m above sea level
Transporting
Original packing or equivalent is recommended
Repairing
Please visit below website and choose your country to
find your service contact window.
http://www.benq.com/welcome