37 Menu operation
System
Information
Language Sets the language for the On-Screen Display (OSD) menus.
Background
Settings
• Splash Screen
Allows you to select which logo screen will be displayed during projector start-up.
Menu Settings
• Menu Type
Selects OSD menu type.
• Menu Display Time
Sets the length of time the OSD will remain active after your last key press.
• Menu Position
Sets the On-Screen Display (OSD) menu position.
Light Source
Information
Shows light hour of used time or resets light source timer.
See Lamp information on page 38.
Operation
Settings
• Reminder message
Sets the reminder messages on or off.
• LED Indicator
You can turn off the LED warning lights. This is to avoid any light disturbance when
viewing images in a dark room.
• Power On/Off Settings
• Direct Power On: Allows the projector to turn on automatically once the
power is fed through the power cord.
• Auto Power Off: Allows the projector to turn off automatically if no input
signal is detected after a set period of time to prevent unnecessary waste of
lamp life.
• BenQ HDMI Media Streaming (QS02)
To enable or disable functions related to Android TV dongle (QS02).
Firmware
Upgrade
Updates the projector firmware via USB reader.
Factory
Default
Returns all settings to the factory preset values.
The following settings will still remain: 2D Keystone, Projector Position, Light Source
Information, Baud Rate, High Altitude Mode.
Reset System Returns all the settings on the System menu to the factory default values.
Information See Information on page 28.
To Next Page
Loading...
