EasyManua.ls Logo

BenQ VK Series - User Manual

BenQ VK Series
52 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Table of Contents i
English
Section 1: Quick Start Guide
1. Please read these instructions ...........................................2
What’s in the Quick Start Guide? ................................................. 2
What’s in the User Manual? .......................................................... 2
2. Package contents ...............................................................2
3. Select and prepare the installation location .....................3
4. Installing the stand ............................................................4
Before you start .............................................................................. 4
Installing the stand ........................................................................ 4
5. Connect the antenna cable ................................................5
6. Connect the power cord ...................................................5
7. Activate the remote control ..............................................6
Remote control usage tips ............................................................. 7
Test the remote control ................................................................. 7
8. Initialize your TV ..............................................................8
Selecting OSD language ................................................................. 8
Performing auto search ................................................................. 9
9. View the TV programs ......................................................10
Changing programs ....................................................................... 10
Adjusting volume .......................................................................... 10
Care and cleaning information .............................................11
What's next? ...........................................................................11
Section 2: User Manual
Introduction ...........................................................................14
Getting to know your TV ......................................................14
Front view ...................................................................................... 14
Control panel ................................................................................. 15
Rear view ........................................................................................ 16
Connecting audio and video inputs .....................................18
Connecting the Composite Video input ..............................19
Connecting the S-Video input ..............................................20
Connecting the Component Video input ............................21
Connecting the PC D-Sub input ..........................................22
Connecting the PC DVI input ..............................................23
Connecting the HDMI input ................................................24
Connecting the stereo audio output ....................................25
Table of Contents
VK32_SK32_SK37_EN.book Page i Thursday, May 14, 2009 6:18 PM

Table of Contents

Questions and Answers

  • T
    Todd RivasAug 15, 2025
    Why is there no picture or sound on my BenQ LCD TV?
    • V
      Victor OwensAug 15, 2025
      If you're not getting any picture or sound on your BenQ LCD TV, here are a few things to check: * Make sure the TV is actually turned on; the power indicator should be green. * Verify that the correct Sound Type is selected. * Try a different input source to see if the problem is with the source itself. * Inspect the cables for any mis-connections. * Ensure the volume isn't turned down. * If connected to a PC, confirm the PC isn't in standby or hibernation and that the video display is set to external output.
  • T
    Tracie CherryAug 18, 2025
    What to do if my BenQ VK LCD TV does not turn on?
    • E
      ejohnsonAug 19, 2025
      If your BenQ LCD TV isn't turning on, try the following: * Ensure the power switch on the power outlet is turned on. * Make sure the power plug is securely inserted into the AC IN jack on the TV and the wall outlet, and that the wall outlet is switched on (if applicable). * Test the power outlet with another working appliance to confirm it's providing power.
  • D
    dustingrayAug 21, 2025
    How to fix a BenQ VK LCD TV remote control that is not working?
    • H
      heatherwhiteAug 21, 2025
      If your BenQ LCD TV remote control isn't working properly, try these steps: * Check the batteries are correctly inserted. * Replace dead batteries with new ones. * Make sure you're within range and at a proper angle to the TV. * Ensure the remote is pointed at the TV's sensor window. * Remove any obstacles between the remote and the TV. * Check that strong fluorescent lighting or direct sunlight isn't interfering with the sensor. * Turn off any nearby devices (like PCs or PDAs) that transmit infrared signals, as they may cause interference.
  • K
    Keith CunninghamAug 26, 2025
    What to do if the cable connection is correct, but there is only sound and no picture is displayed on my BenQ VK LCD TV?
    • N
      Nathaniel DavidAug 26, 2025
      If you have sound but no picture on your BenQ LCD TV, even with the cable connected, consider these solutions: * Ensure the cables are firmly connected to the terminals on the TV. * Verify that the input signal resolution from the source device (like a PC or game console) is supported by the TV. The maximum supported resolutions are 1080p for HDMI and Component Video inputs, and 1360×768 @ 60Hz (VK Series)/ 1920×1080 @ 60Hz (SK Series) for PC and DVI inputs. * If the input signal resolution is too high or not supported, lower it on the source device.
  • B
    Bonnie WilcoxAug 28, 2025
    Why is the picture not clear when viewing PC input on my BenQ LCD TV?
    • R
      Regina FordAug 29, 2025
      If the picture is unclear or there's no image when viewing PC input on your BenQ LCD TV: * Check the cable connections. * If the PC video output resolution is not supported by the TV, select a compatible output resolution on the PC. The highest acceptable PC timing is 1360×768 @ 60Hz (VK Series)/1920×1080 @ 60Hz (SK Series). * If the displayed image appears to be shimmering and unclear, activate the Auto Adjust function in the PC menu to let the TV adjust the picture settings automatically.
  • N
    Nicholas WarrenAug 31, 2025
    Why is the picture doubled or tripled on my BenQ LCD TV?
    • T
      thomas99Aug 31, 2025
      If the picture on your BenQ LCD TV is doubled or tripled, especially when using the TV tuner input, it might be due to interference affecting your TV antenna signal. Try redirecting or relocating your antenna to reduce the interference. Picture ghosting can also be caused by reflections from buildings, large metal structures, and mountains. If you have an exterior antenna, consider having a qualified specialist adjust it.
  • D
    Douglas SullivanSep 4, 2025
    Why is the image distorted on my BenQ LCD TV?
    • D
      darrellstevensSep 4, 2025
      If the image appears distorted on your BenQ LCD TV, ensure the TV's aspect ratio is correctly set to suit the image source. You can also try a different input source to see if the issue persists or if the problem lies with the original source.
  • M
    Michael BoyerSep 7, 2025
    How to fix a blurry picture on BenQ LCD TV?
    • M
      Matthew CortezSep 7, 2025
      If the picture on your BenQ LCD TV isn't sharp or contains image movement when viewing the TV tuner input, the reception may be weak. Try changing programs to see if the issue is with the broadcast. Make sure the antenna cable is properly connected. You might also try redirecting or relocating your antenna to improve the picture. If you have an exterior antenna, consider having it adjusted by a qualified specialist.
  • A
    Alexander LeeSep 12, 2025
    Why does the image on my BenQ LCD TV appear washed out?
    • T
      Tina HallSep 12, 2025
      If the image on your BenQ LCD TV appears too 'washed out', or the darkest areas of the image appear too bright, try lowering the Contrast setting. Also, the input source device (e.g. DVD player) brightness level may be set too high. Reduce its brightness level until the black areas of the picture appear as black.

BenQ VK Series Specifications

General IconGeneral
BrandBenQ
ModelVK Series
CategoryLCD TV
LanguageEnglish

Related product manuals