Need help?Do you have a question about the Bentel Security CLASSIKA Series and is the answer not in the manual?
General| Brand | Bentel Security |
|---|---|
| Model | CLASSIKA Series |
| Category | Keypad |
| Language | English |
Overview of CLASSIKA Series keypads and their compatibility with control panels.
Distinction between BKB-LCD and BKB-LED keypad models.
Details on keypad mounting, communication protocol, and anti-tamper features.
Table detailing power supply, current draw, temperature range, and dimensions.
Numbered list and description of physical parts of the LCD keypad.
Step-by-step guide for surface mounting the keypad, including wire routing and fixing.
Table explaining terminal abbreviations, descriptions, voltage, and current.
Explains the automatic entry into programming mode upon first power-up.
Details conditions for accessing programming to prevent unauthorized changes.
Describes how to use keys (ENTER, ESC) to navigate and confirm programming steps.
Instructions for setting the address on the LCD keypad, from 1 to 32.
Instructions for setting the address on the LED keypad, from 1 to 8.
Guide for adjusting active and inactive brightness levels for keys and display.
Instructions for adjusting the LCD display contrast using specific keys.
Procedure for setting the volume of the internal buzzer using keys.
Information on connecting the keypad to the control panel's BPI bus.
Specifies that the keypad supports only a 12V BPI level.
Advises customers on environmentally sound disposal of used equipment.
Explains the Waste Electrical and Electronic Equipment directive and proper disposal.
To Next Page
