Need help?Do you have a question about the Bentel Security Absoluta T-Line Series and is the answer not in the manual?
General| Brand | Bentel Security |
|---|---|
| Model | Absoluta T-Line Series |
| Category | Keypad |
| Language | English |
Specifies the power supply requirements for the keypad, including minimum, typical, and maximum voltage.
Details the current consumption variations based on working conditions, from idle to active states.
Defines the operational temperature limits for the keypad.
Provides the physical dimensions (Width x Height x Depth) of the keypad in millimeters.
Instructions for installing the keypad flush to a wall using mounting holes.
Instructions for mounting the keypad on a model 503 box or similar.
Procedure to set the unique address for the keypad, from 1 to 32.
Steps to enable/disable and set the address for the proximity reader.
Guide to enable/disable and set the address for the input expander.
Instructions to enable/disable and set the address for the output expander.
How to program the functioning mode for zones T1, T2, and T3.
Procedure to adjust the active and inactive brightness of keys and display.
Steps to adjust the contrast level of the LCD display.
Guide to adjust the volume of the internal buzzer.
Information on connecting the keypad to the control panel's BPI bus.
Details on connecting roller blind contacts to keypad zones in FAST mode.
Describes conditions triggering tamper alerts (e.g., opening keypad, expansion tamper).
Explains when BPI disconnection alerts are generated for the keypad.
To Next Page
