To Next PageTo Next Page
Need help?Do you have a question about the Bentel Security FireClass FC400P and is the answer not in the manual?
General| Brand | Bentel Security |
|---|---|
| Model | FireClass FC400P |
| Category | Smoke Alarm |
| Language | English |
Defines the optical smoke detector's logic modes for alarm generation and sensitivity.
Describes how to adjust the detector's smoke detection sensitivity levels.
Explains how the FC400P detects smoke using light scattering principles.
Details the infra-red emitter, receiver, and lens arrangement in the sampling volume.
Describes the chamber's design, including chevrons, for excluding ambient light and guiding smoke.
Outlines the detector's internal electronic circuits, including optical and common circuits.
Information on connecting the detector to the loop and remote indicators.
Lists the major components of the detector.
Details the process of assembling the detector body, PCB, chamber cover, and outer cover.
Provides dimensions and materials for the detector and base.
Lists operating and storage temperature, humidity, and impact resistance.
States compliance with EN50130-4 and EN61000-6-3 standards.
Details loop voltage, quiescent current, and alarm current.
Describes how the detector transmits signals representing digital current levels to a control unit.
Explains that the detector address is held in internal E²PROM and programmed via a tool.
Describes the address flag used to identify the detector's address and zone.
Lists available product codes for the detector and compatible bases.
Recommends environmentally sound disposal methods for used equipment.
Indicates that the product should not be disposed of with household waste in the EU.
