Need help?Do you have a question about the Bentel J424 and is the answer not in the manual?
General| Power supply | 9V battery or mains power |
|---|---|
| Current consumption (standby) | < 10 μA |
| Alarm output | 85dB at 3m |
| Power Source | Battery |
| Alarm Sound Level | 85dB at 3m |
| Standards | EN 14604 |
Overview of J424 and J408 control panels, their features, complexity, and quality.
Details on optional accessory modules like Expander, Extinguishment, Display, and Repeater panels.
Details on Inputs, Outputs, Operating Features, Interface, Extinguishment Module, Access Levels, and Power Supply.
Describes the function and meaning of various status LEDs on the control panel.
Lists and describes the identification numbers for components of J424, J408, and J400-REP.
Explains the function of each key on the control panel, including Access Level 2 operations.
Instructions for installing Extinguishment Modules, Expander Module Kits, and Display Modules.
Steps for installing repeater panels, including wiring and addressing.
Guidance on mounting the control panel, drilling holes, and routing cables.
Detailed explanation of terminals on Main Board, Expander, Extinguishment, and Power Supply boards.
Explains panel status signals during standby, pre-alarm, alarm, and fault conditions.
Details user access levels, key functions like Silence, Reset, Test, and Extinguishment control.
Explains how to view logged events and interpret the meaning of status LEDs.
Instructions for enrolling Expander and Extinguishment Modules using the J400 software.
Steps to download programmed parameters from a PC to the control panel.
Procedures for entering and exiting the panel programming session using the overlay.
Steps to program zone settings like thresholds, options, and alarm behavior.
Configuration of pre-alarm time, investigation time, and other time-related parameters.
Setting up pulse patterns for NAC and ALARM outputs, and OC output events.
Configuring user code, day/night modes, clock, date, and failure signalling delays.
Programming stabilization time, reset time, silenceable outputs, and configurations.
Programming parameters for Extinguishment and Expander modules, and power stations.
Steps for programming LCD Module address, zone descriptions, strings, and date format.
Summary of technical specifications for the control panel and its modules.
Details on the function, voltage, and current for each terminal on the boards.
To Next Page
