Bentel J408 - User Manual

®
INSTALLATION MANUAL
CONVENTIONAL
FIRE PANELS
424
408

Summary

INTRODUCTION

The J424 and J408 Control Panels

Overview of the J424 and J408 fire control panels, their features, and benefits.

Extinguishment Module Operation

INSTALLING THE CONTROL PANEL

Installing Accessory Boards

Installing Extinguishment Modules

Step-by-step guide for physically mounting and connecting Extinguishment Modules.

Installing Expander Modules

Installing Display Modules

Installing Repeaters

Control Panel Installation

Steps for physically mounting the main control panel and making essential connections.

PROGRAMMING FROM A PC

Enrolling Expander Modules

Enrolling Extinguishment Modules

Programming Zones

Configuring zone parameters, thresholds, and options using the J400 software.

Programming Outputs

Setting up alarm signal patterns for NAC and ALARM outputs via the J400 software.

Programming Panel Settings

Configuring system-wide settings like Day/Night modes, times, and delays in the J400 software.

Downloading Configurations

Procedure for transferring programmed settings from the PC to the control panel.

PROGRAMMING FROM THE PANEL

Accessing Programming Session

Steps to enter the control panel's programming mode using jumpers and keys.

Programming Overlay Usage

Zones Programming Phase

Configuring zone parameters directly on the control panel.

Times Programming Phase

Outputs Programming Phase

Panel Programming Phase

Various Programming Phase

Modules Programming Phase

LCD Module Programming

Bentel J408 Specifications

General

Brand	Bentel
Model	J408
Category	Smoke Alarm
Language	English