13
What’s on the V.Tape tuning menu…
Pr (TV station)... The TV program number appears
here.
Fine (fine tuning)...To fine tune a station when it
is used via the video tape recorder.
Source (specific source selection)... You can
instruct the video tape recorder to get its
information from a specific source whenever it
records a specific TV programme:
V.Tape tuner... Is the basic setting and it should be
selected in far the most cases. The TV
programme is recorded from the video tape
recorder’s tuner, you can therefore watch
another TV programme while you are
recording.
TV tuner... Should be selected if you want to
record a particular programme directly from
the TV. Here, you cannot watch another TV
programme while you are recording.
V.Tape decoder... Should be used if you want to
record via a decoder connected to the V-tape
decoder socket.
Colour Sys (colour system)... This item only
appears on the menu in BeoVision Avant video
systems sold on certain markets!
AUTO… is the basic setting. The video tape
recorder uses information about colour systems
entered into the video tape recorder’s Basic
Setup menu (please refer to pages 52-54,
Preferences for the video tape recorder).
If you are e.g. dissatisfied with the colour when
you record a particular TV programme (or if there
is no colour at all), you can overrule this basic
setting and enter the exact colour system you
want the video tape recorder to use for a
particular TV program number, PAL or SECAM,
provided these systems are available.
To Next Page
Loading...
