To Next PageTo Next Page
Need help?Do you have a question about the Beretta EXCLUSIVE GREEN 25 CSI and is the answer not in the manual?
General| DHW Output | 25 kW |
|---|---|
| Energy Efficiency Class (Heating) | A |
| Energy Efficiency Class (DHW) | A |
| Type | Condensing |
| Fuel Type | Gas |
Lists main operating elements and circuits of the boiler.
Outlines crucial safety measures and warnings for boiler operation and installation.
Details installation prerequisites, model types, and step-by-step mounting procedures.
Details the types and sizes of hydraulic connections for the boiler system.
Guides on positioning, attaching, and wiring the external probe for climatic control.
Explains the connection of the condensate collector to an evacuation system.
Outlines necessary checks and installation steps for connecting the gas supply to the boiler.
Details how to connect the boiler to the mains power and other electrical components.
Step-by-step guide for filling the central heating system and managing air.
Instructions for emptying the domestic hot water system to prevent freezing.
Details installation for forced open (B23) and sealed (C) systems, including duct requirements.
Explains twin outlet configurations and provides graphs for duct lengths.
Illustrates various homologated exhaustion configurations (C13, C23, etc.) for the boiler.
Lists detailed technical data for heating, DHW, gas, and hydraulic aspects of the boiler.
Provides detailed parameters for methane and GPL gas types, including burner and ventilator specifications.
Explains the boiler's control panel, its buttons, and general operating functions for C.S.I. and R.S.I. models.
Details the various symbols displayed on the boiler's control panel.
Guides on the correct steps to power on and start the boiler.
Explains the different operating modes (Autumn, Winter, Spring, Summer) and their functionalities.
Details how to adjust the heating water temperature using selectors and external sensors.
Explains the process for setting the domestic hot water temperature for C.S.I. and R.S.I. models.
Describes normal boiler operation, safety stops, and fault indications.
Provides instructions for switching the boiler off for short or long periods.
Guides on semi-automatic and manual filling of the heating circuit for both C.S.I. and R.S.I. models.
Explains how to view system information and details fault codes.
Lists and explains various information codes displayed by the boiler for technical assistance.
Details the S.A.R.A. function for automatic ambient temperature adjustment and energy saving.
Explains the S.A.R.A. Booster and Domestic Hot Water Pre-heating functions.
Provides a comprehensive table of faults, their codes, symbols, and indicates if they are permanent or temporary.
Details how to identify and reset different types of boiler faults and anomalies.
Explains how to set a password and modify various programmable parameters of the boiler.
Lists and defines programmable parameters specific to the GREEN C.S.I. model for system customization.
Lists and defines programmable parameters specific to the GREEN R.S.I. model for system customization.
Guides on connecting the external probe and setting up thermoregulation parameters like building type and temperature curves.
Explains how to set the type of heat request and select thermoregulation curves based on system type.
Details procedures for setting the password and adjusting the gas type parameter.
Guides on modifying boiler power and navigating through calibration phases.
Covers adjustments for maximum/minimum ventilator speeds and power settings.
Details the process of converting the boiler between natural gas and LPG.
Explains how to systematically check and analyze the boiler's combustion parameters.
Provides details found on the boiler's serial number plate, including gas type and certifications.
Details high voltage wiring for ambient thermostats and time clocks.
Guides on connecting water tank sensors and low voltage functions like thermostats.
Explains how to connect a supplementary pump for systems requiring higher flow rates.
Presents graphs illustrating circulator residual head based on capacity and speed.
