RECEIVING AND INSPECTING THE EQUIPMENT
Even though the equipment is shipped crated, care should be taken during unloading so the equipment is not
damaged while being moved into the building.
1. Visually inspect the exterior of the package and skid or container. Any damage should be noted and reported
to the delivering carrier immediately.
2. If the damage appears minor, open and inspect the contents with the carrier. Take photographs of the packaging
before it’s opened. If the carrier is impatient & won’t wait, return the goods if the damage appears to be anything more
substantial than superficial damage to the external protective packing layers.
3. In the event that the exterior is not damaged, yet upon opening, there is concealed damage to the equipment,
notify the carrier. Notification should be made verbally as well as in written form.
4. Request an inspection by the shipping company of the damaged equipment. This should be done within 10 days
from receipt of the equipment.
5. Be certain to check the compressor compartment housing and visually inspect the refrigeration package. Be sure
the lines are secure, and the base is still intact.
6. Freight carriers can supply the necessary damage forms upon request.
7. Retain all crating materials until an inspection has been made or waived.
APPLIANCE SAFETY
Always read and obey all safety messages.
This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can injure or kill you
and others. All safety messages will follow the Safety Alert Symbol and either the words “DANGER”,
“WARNING” OR “CAUTION”.
DANGER
DANGER means that failure to heed this safety statement may result in Death or Severe Personnel Injury.
WARNING
WARNING means that failure to heed this safety statement may result in extensive product damage, serious
personal injury, or death.
CAUTION
CAUTION means that failure to heed this safety statement may result in minor or moderate personal injury, or
property or equipment damage.
All safety messages will alert you to what the potential hazard is, tell you how to reduce the chance of injury, and let you
know what can happen if the instructions are not followed.
NOTE: IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire, electric shock or injury, when using your appliance, follow these basic precautions:
⚫ Plug into grounded 3-prong outlet.
⚫ Do not remove the grounding prong.
⚫ Do not use an adapter.
⚫ Do not use an extension cord.
⚫ Disconnect power before cleaning.
⚫ Disconnect power before servicing.
⚫ Use 2 or more people to move and install the appliance.
SAVE THESE INSTRUCTIONS
Page 3 of 14
To Next Page
Loading...
