Bergeron By Design Height Right Chair User Manual

Height Right Chair
ASSEMBLY GUIDE
WARNING: Prevent serious injury or
death from falls or sliding out.
• Never leave child unattended
• Always keep child in view
• Secure straps tightly
• Never use as a stepping stool
• Always secure child in the restraint
!
!
Parts
Left SideRight Side
Foot Rest (8 pcs.) (4 pcs.)(4 pcs.)
3 4 5
(8 pcs.)
a
b
c d
e
(6 pcs.) Right + Left Cap Right + Left Clip
* optional with tray
and grab rail.
Seat
a
e
d
d
d
d
c
c
d
2 Back Supports
Front Support
2 Metal Cross Bars
Allen KeyBack
Insert a Wooden Dowel (e) into the larger hole in each of the Back Supports
and Front Support. Insert a Wood Nut (a), as shown into the inner holes of
the 3 Supports. Attach the 3 Wooden Supports as shown and insert Long
Screws (d). Loosely tighten the Long Screws into Wood Nuts through the Left
Side with the Allen Key. Labeling on the Rear Supports should be visible.
Attach the 2 Metal Cross Bars as shown and
insert Screws (c) . Loosely tighten the
Screws (c) into the Metal Cross Bars through
Left Side with the Allen Key.
Slide in the Seat and Foot Plate with the curved
edges facing forward. Make sure that the Seat
and Foot Rest are at the appropriate height for
the occupant. See the Sizing section for proper
placement of the Seat and Foot Rest.
Insert the rest of the Dowels, Wood Nuts, and
Screws as needed to attach the Right Side of
the chair. Do Not fully tighten screws.
Insert a Wood Nut (a), as shown into the inner holes of the Back. Attach the
Back as shown and insert a Long Screw (d). Loosely tighten the Long Screw
into Wood Nut through the Left Side with the Allen Key.
• Use for children 6 months and up
or when child can sit independently
• The front edge of the footrest should
never extend beyond the bottom
edge of the front supports at floor level
• SHORTER THAN
BACK SUPPORTS
FRONT
SUPPORT IS
SHORTER
HARDWARE a (3pcs.)
d (3pcs.)
e (3pcs.)
HARDWARE a (4pcs.)
d (4pcs.)
e (3pcs.)
c (2pcs.)
HARDWARE c (2pcs.)
HARDWARE a (1pcs.)
d (1pcs.)
a
d
c
c
* As the child grows,
the TOP metal cross
bar CAN be removed.
Logos this side
1 2
WARNING: The child should be secured in the high chair at all times by the restraining
system. The tray is not designed to hold the child in the chair. It is recommended that the chair be
used only by children capable of sitting upright unassisted.

Bergeron By Design Height Right Chair Specifications

General

Brand	Bergeron By Design
Model	Height Right Chair
Category	Indoor Furnishing
Language	English

Summary

Assembly Instructions

Assemble Left Side Supports

Assemble the left side supports by inserting dowels, nuts, and screws into the chair's frame.

Attach Back Support

Attach the back support to the chair frame using nuts and screws.

Attach Metal Cross Bars

Secure the two metal cross bars to the chair frame using screws.

Attach Right Side Components

Complete the right side assembly using the remaining dowels, nuts, and screws.

Install Seat and Foot Plate

Insert the seat and foot plate, ensuring correct orientation and height.

Accessory Attachment

Tray and Grab Accessory Clips

Attach clips for tray/grab accessories and engage safety latches for secure use.

Seat and Footrest Adjustment

Height Adjustment

Adjust seat height for child's elbows and foot plate for foot placement.

Depth Adjustment

Position the seat for optimal depth, supporting 3/4 of the child's thigh.

Teen / Adult Use

Adapt the chair for teen/adult use by removing parts for a larger seating surface.

3 Point Belt System

Belt Installation

Install the 3-point belt system by connecting lap straps to the crotch strap.

Belt Operation

Secure child by clicking lap straps into the crotch strap and release using the center button.

Warranty and Care Information

5 Year Limited Warranty

Details on warranty coverage, service, and claims for defective parts.

Product Care and Maintenance

Instructions for cleaning the chair and maintaining tight screws for safety.

Safety Notice

Information on safety standards, using only manufacturer parts, and replacing worn parts.