Berges ACM S2 - 14 Operating Functions; General; Control Panel

14.Operating functions
14.1.General
The ACM D2/S2 inverters are pre-programmed to run a 4-pole AC-induction motor. In many cases
no additional programming is required.
14.2.Control panel
All functions of the inverter can be controlled by way of the ACM D2/S2 control panel. The 4 input
keys allow control of the motor and direct parameter programming.
The functions are separated into three levels in order to facilitate
programming (function tables TAB1, TAB2, TAB3).
TAB1:
Programming of the basic parameters of the inverter and
call-up of works settings.
TAB2:
Configuration of the analog and digital inputs, programming
of the output voltage and of the SECURITY function.
TAB3:
Configuration of the analog and digital outputs, the
extended setting functions and call-up of the diagnosis
function.
Keys Description
Function interrogation forward.
+
Function interrogation back.
1 sec.
a) Jump back to the first function of the function table or sub-menu.
b) Jump out of the table or sub-menu (starting from the first function of the
function table or sub-menu).
Increments the parameter value of the selected function.
To increase the speed at which scrolling through the value range takes
place, keep
INC
depressed and briefly press
DEC
.
Reduces the parameter value of the selected function.
To increase the speed at which scrolling through the value range takes
place, keep
DEC
depressed and briefly press
INC.
+
Permits access to a sub-menu or a parameter table.
+
Help function: A Help text can be called for each function. A key change
from
INC
to
DEC
with depressed
SHIFT
key inverts the text scroll-
direction of the help text.
+ +
Software reset.
BERGES electronic
22 Operating manual ACM D2/S2 09.07.2001