9
STEP 4 - To attach the handle (7) to the lid of the ceramic BBQ (6), start by aligning the bolt holes of the handle to pre-
installed bolts on the lid. Secure the handle (7) with the 4x pre-attached dome headed nuts. If they don’t match
perfectly, lightly unscrew the bamboo handle screws a bit, until they t.
Tighten screws in bamboo when handle is correct positioned, but don’t screw too tight!
STEP 5 - Place the ceramic BBQ on the stand with the bottom vent facing to the front of the stand, allowing the vent to open
and close without any interruption.
STEP 6 - When the grill is securely placed on the stand, it is recommended to place a level on the cooking grill to ensure there
is a at cooking surface.
The ceramic BBQ is now ready to use. Please ensure that the grill curing instructions are read thoroughly prior to use.
To Next Page
Loading...
