EasyManua.ls Logo

Bergman 2020543 - Safety Instructions; General Power Tool Safety; Work Area Safety; Electrical Safety

Bergman 2020543
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW
Enquiries: 0344 482 5888
www.Solutionsworld.co.uk
In accordance with essential requirements of the European Directive(s)
Do not dispose of appliance with standard household waste. See page XX for more
details.
Safety Instructions:
WARNING!
If this product is not used properly, it can be dangerous. The warning and safety
instructions must be followed to ensure reasonable safety and efficiency in using
this product. The operator is responsible for following the warning and instructions
in the manual and on the product. Never use the product unless the guards
provided by the manufacturer are in the correct position.
WARNING!
For safety reasons, children under the age of 16, and people not familiar with these
operating instructions must not use the Bergman® Long reach lopper and trimmer.
Persons with reduced physical or mental abilities may use the long reach lopper
and trimmer only if they are supervised, or instructed by a responsible person.
General power tool safety warnings
WARNING! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock; fire and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in
the warnings refers to your main operated (corded) power tool or battery operated
(cordless) power tool.
Work Area Safety
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gasses or dust. Power tools create sparks which may ignite the dust of fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you
to lose control.
Electrical Safety
Power tools must match the outlet. Never modify the plug in any way. Do not use any
adaptor plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets
will reduce the risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.

Related product manuals