Bergsteiger CAPRI - Attaching and Removing Wheels; Attaching Wheels with Lock Knob; Transport Protection Removal; Removing Wheels Procedure

35
G SEAT UNIT
Instrucons for use:
I) Posioning the child in the seat unit (Fig. A-F)
Never leave the child in the seat unit without the safety harness on, even if the seat unit is
outside of the car!
• Press the red buon to open the harness of the seat unit.
• Place the child into the seat unit, close the safety harness and adjust the tension.
• Make sure that the child is seated properly and its back rests against the seat unit.
• The safety harness should lay at and rmly on the child‘s shoulders.
• Insert the two plasc hooks into the buckle together. An audible „click“ conrms that they
have locked into place correctly.
• Tighten the front adjustment harness so that the safety harnesses of the child seat rest
rmly on the child‘s body (harness system).