Bergsteiger CAPRI - Attaching Seat Extension; Seat Extension Installation; Fabric Attachment and Bag Security; Assembly Equivalence

36
G SEAT UNIT
Adjusng the safety harness:
• The lengths of the harnesses (harness system) must be individually adjusted to t the child.
• The harnesses should be in the posion closest to the child‘s shoulders and not twisted.
You can adjust the safety harness system of the seat unit to t the individual needs of the child in
the following manner:
a) To loosen the safety harness, press the adjustment buckle on the front side of the seat unit
and simultaneously pull both straps of the seat unit away from it (to the front).
b) To ghten the safety harness, please pull the part of the harness on the front side of the seat
unit. Make sure that the belt is not twisted and rests gently (but rmly) on the child‘s body.
Support pillow:
This seat unit is equipped with a removable support pillow for babies. This oers opmal
sleeping comfort and provides support for the baby‘s head. We recommend using the support
pillow up to an age of 5 months.
II) Using the seat unit in a car
When using the seat unit in a car, always observe the following points:
• Never use the seat unit on car seats with acvated airbag. The child could be severely
injured if the airbag is triggered. Danger to life and limb!
• Always aach the seat unit in the opposite direcon of the vehicle.
• The passenger seat should be posioned all the way to the back.
• Pull the seat belt of the car all the way out and pull it (lap belt) through the two belt guides
located on the front side of the seat unit (see Fig. C).
• Buckle the seat belt of the car.
• Pull the diagonal strap of the car seat belt (shoulder belt) through the belt guide which is
located on the back of the seat unit (see Fig. D & E).
• The transport handle of the seat unit must be correctly posioned for use in the car (see Fig.
F).
• The seat unit is now correctly mounted.