Bergsteiger CAPRI - Adjusting the Backrest; Backrest Adjustment Mechanism; Three Position Adjustment; Sitting Position Age Warning

37
G SEAT UNIT
III) Adjusng the transport handle
To adjust the transport handle, please press the two red buons on the sides of the transport
handle with both hands at the same me and adjust it. The buons lock into place as soon as
the next posion of the handle is reached. This is conrmed by an audible „click“.
The handle can be adjusted to the following four dierent posions (see Fig. G):
1. Use in the car
2. Transport
3. Sleep and cradle posion
4. Sing posion (no cradle funcon)
IV) Care instrucons
• The fabric parts or the seat unit can be washed with warm soapy water.
• Hand washing at a temperature of 30° C is recommended.
• Never tumble dry in a clothes dryer.
Removing the fabric parts:
• Release the harness system.
• Remove the support pillow and harness pads.
• Pull the harnesses through the fabric.
• Li o the fabric.
Aaching the fabric:
• Sck the harnesses back through the openings in the fabric.
• Pull the fabric back onto the seat.
• Pull the pads back onto the harnesses.
• Insert the support pillow again.