PRIOR TO FIRST USE
Follow these instructions when using the appliance for the first time: Carefully unpack the air cooler and all
accessories and remove all packaging material and any promotional stickers.
• Keep the packaging (plastic bags and cardboard) out of reach of children.
• After unpacking the appliance, carefully check it for external damage that may have occurred during
transport.
• Place the appliance on a sturdy, flat surface and make sure there is enough space all around for
sufficient ventilation.
• Check that all mentioned accessories have been supplied.
• Clean the air cooler with a slightly damp cloth.
Prior to connecting the appliance, check that:
· the connection voltage corresponds with what is stated on the rating plate;
· the socket and cord are suitable for the appliance;
· the plug of the cord fits in the socket;
· the appliance is placed on a stable and flat surface.
A mobile air cooler must be placed on a flat surface with sufficient room all around. Do not block the air
inlets and outlets and ensure a free space of minimum 30 cm around the appliance.
OPERATING THE AIR COOLER
In addition to cooling, the air cooler has two other modes, i.e. ventilation and air humidification.
The air cooler can be operated via the control panel on the appliance and with the provided remote control.
· Choose a location near a socket.
· Insert the plug in a socket.
· The appliance gives a short beep sound.
· The indicator light on/off lights up and the appliance is standby.
To Next Page
Loading...
