EasyManua.ls Logo

Berkey Go Berkey Kit User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
®
Go Berkey Kit
Introduction
Now that you have bought your water purifier, you have taken the first
step toward protecting from disease causing pathogens, parasites, harmful
chemicals, heavy metals and other waterborne contaminates. he ease of operation of this unit
combined with a proven effectiveness at eliminating waterborne diseases ,
®
has led to water purification systems being specified for field operations by many of
the world’s major aid and emergency relief organizations.
Go Berkey
yourself viruses,
T
and contaminates
Berkey
®
Contents:
1- Upper Chamber 1- Lower Chamber
1- Assembly instruction sheet
Assembly Instructions:
1. system
2.
3. Prime Black Berkey™ purification element (see reverse side of instruction sheet).
4. Place the large sealing washer (4) over the threaded portion of the element (3.)
5. Place the element (3) into the hole in the base of the upper chamber (1).
6. Secure element in the chamber base by screwing on the wing nut (5) onto the threaded mount.
7. Place the upper chamber (1) onto the lower chamber (2) and place lid (6) in position.
1- Priming Button
1- Vinyl carrying case
Extreme cleanliness is important. Wash hands and before proceeding to assure that contamination of
the components does not take place during assembly.
Remove the purification element and parts from their protective packaging, checking each item against the
above list.
1- Generic Sport Berkey
®
water bottle
1- Purification element, wing nut and washer
1- Black Berkey Primer
1- Lid
Operation:
When lower chamber is partially filled, be cautious not to overfill upper chamber as this could cause lower chamber to overflow. For example, if the lower chamber
is 1/3 full the upper chamber can be refilled by 2/3rds, if the lower chamber is ½ full, the upper chamber can be refilled by ½, etc.
GO BERKEY STAINLESS ASMBLY 03-14
NEW MILLENNIUM CONCEPTS, LTD.NEW MILLENNIUM CONCEPTS, LTD.
®
Berkey
Water Purifiers
“Simply the Best”
Notes:
1)
ower chamber be run to waste as well
as the new water that is purified during the
first 1 minute to also be run to waste.
2) When installing purification elements for
the first time or replacing used elements,
always prime and condition the new
purification elements.
3) After cleaning elements, it is recommended
that the elements be re-primed. This will
back-flush any process dust from the pores
of purification elements and prevent
premature clogging.
If the system is left to stand for more than
3 days, it is recommended that any water left
in the l
Care and Use
Fill the Sport Berkey Portable
Water Filter with water, screw on
cap and tighten securely to
eliminate leaks. Flush water
through filter by pulling down lever,
so that straw is exposed, and
squeeze water through filter & out
the straw. Repeat this flushing
process twice before drinking. This
removes excess process dust
from the filter. After 2 flushes,
rinse the bottle & cap. Your filter
bottle is now ready for use.
Enjoy!
®
WARNING: Failure to read, thoroughly understand, and follow all instructions may result in personal injury, water
damage, or voiding of the warranty! It is the assembler’s responsibility to make sure all components are properly
®
assembled and installed using the instructions provided. While your Berkey system should not have any
leaking problems, there is always the chance that a leak might occur due to being improperly assembled or
perhaps a faulty part. In an overabundance of caution, we recommend that for the first 24 hours the filled system
be placed in an area wherein if such a leak were to occur, the resulting spillage would not damage anything within
the household.
Maintenance and Storage
The Sport Berkey Portable Water Filter
has a shelf life of 50 years. When the filter
system will not be used for an extended period,
remove filter and flush the unit with either a
chlorinated solution of 1/4 tsp. per one half
gallon of water, or a 50/50 mix of 3%
Hydrogen Peroxide and water. Rinse. Allow
parts to dry thoroughly with cap removed. Re-
assemble and seal in an air tight container if
possible. Do not allow filter to freeze, do not
place in microwave oven and do not run hot
water through the filter. Note: All contaminants
that this filter has the ability to remove or reduce may
not necessarily be in the user's water supply.
®
Question and Answer IconNeed help?

Do you have a question about the Berkey Go Berkey Kit and is the answer not in the manual?

Berkey Go Berkey Kit Specifications

General IconGeneral
BrandBerkey
ModelGo Berkey Kit
CategoryWater Filtration Systems
LanguageEnglish

Summary

Introduction to Go Berkey Water Purifier

Assembly Instructions for Go Berkey

Care and Use of Sport Berkey Filter

Maintenance and Storage Guidelines

Priming Black Berkey Purification Elements

Priming Steps for Elements

Detailed steps for priming purification elements using a faucet or bottle.

Priming and Purging with Pump

Instructions for priming and purging elements using the provided pump.

System Maintenance and Additional Information

Regular Maintenance Procedures

Cleaning lower chamber, descaling, and scrubbing elements for optimal flow.

Additional Usage Precautions

Advice on water sources, disinfection, and drying elements.

System Test with Red Food Coloring

Procedure to test purification effectiveness using red food coloring.

General Warranty Information

Related product manuals