(A) Upper System
Chamber
(B) Lower System Chamber
with rubber ring attached
(C) System
Lid
(E) Knob Screw
Failure to read, thoroughly understand, and follow all instructions may result in injury, water damage, or voiding of the warranty! It is
the assembler’s responsibility to make sure all components are properly assembled and installed using the instructions provided. While
your Berkey
®
System should not have any leaking problems, there is always the chance that a leak might occur due to being improperly
assembled or perhaps a faulty part. In an overabundance of caution, we recommend that for the rst 24 hours the lled system be placed
in an area wherein if such a leak were to occur, the resulting spillage would not damage anything.
(D) Small Metal
Washer
System Parts List
(F) Knob
Parts shown for illustration
only and are not to scale.
Instructions for Big Berkey
®
, Crown Berkey™, Imperial Berkey
®
,
Royal Berkey
®
and Travel Berkey
®
water ltration systems
(G)
Standard
Spigot
(H) Spigot Hex Nut
or Wing Nut
(style may vary)
(I) Spigot Flat
Washer (x2)
(J) Black Berkey
®
Elements (x2)
(quantity varies by system)
(R) Vapor
Lock Clip
(N) Blocking
Plugs
(style and
quantity
varies by
system)
(M) Wing Nut
(1 per
element)
(P) Universal
Primer
(L) Sealing
Washer
(1 per
element)
(K) Tan
Priming
Button
(Q)
Fluoride
Element
Adapter
(O)
Two
Vials
of Red
Food
Coloring
Berkey
®
Stainless Steel System
Spigot
Elements and Other Included Parts
Illustration of
assembled system
1
To Next Page
Need help?
General
