Need help?Do you have a question about the Berlan BMS520A and is the answer not in the manual?
General| Fuel Tank Capacity | 1.2 L |
|---|---|
| Shaft Type | Straight |
| Engine Type | 2-stroke |
| Displacement | 52 cm³ |
| Weight | 7.5kg |
| Cutting Width | 255mm |
Instructions for loosening handle bracket screws and attaching handle units.
Mounting the protective cover to the gear head using screws.
Procedure for adjusting the speed Bowden cable with 1-2mm clearance.
Steps to install cutting knife, including pressure plate and fastening screw.
Process for attaching the nylon cutter onto the gear head arbour.
Instructions for mixing and filling the petrol-oil mixture into the tank.
Step-by-step guide for starting a cold engine, including choke and recoil starter.
Procedure for starting the engine when it is already warm.
Steps to safely turn off the engine and allow it to cool down.
Guidance on connecting the base frame to the engine unit.
To Next Page