Berlin Gardens Donoma DRFP4254C User Manual

Top Assembly Detail
Control Panel Installation
Hardware Included
Tools / Items Needed
3/4" Panhead Screws
(x4)
Assembly Guide
DRFP4254C
Donoma 42"x 54" Rectangular Fire Table
(Counter Height)
Cordless Drill
#2 Square Drive Bit
+
DRFP4254
Donoma 42"x 54" Rectangular Fire Pit
Allen Wrench
(included)
1 - AAA Battery
(not included)
Cresent Wrench
7/16" Wrench
1/4" x 2 1/2" Bolts
(x4)
1/4" Flange Nuts
(x4)
Fasten the Fire Pit Top to the Fire Pit
Base by inserting four 1/4" x 2 1/2"
bolts through the rectangular slots.
The bolt heads should be on the
outside of the base.
Fasten on the inside of the base
using the 1/4" Flange Nuts.
Locations of Slots for Bolts
Step 1
Step 2
Place the control panel into the cutout located in
one of the long sides of the fire pit base.
Fasten it using four 3/4" Panhead Screws.

Berlin Gardens Donoma DRFP4254C Specifications

General

Brand	Berlin Gardens
Model	Donoma DRFP4254C
Category	Outdoor Fireplace
Language	English

Summary

Step 1

Top Assembly Detail

Fasten the Fire Pit Top to the Fire Pit Base using bolts and flange nuts.

Locations of Slots for Bolts

Shows the location of slots for bolts on the fire pit base.

Hardware Included

Tools / Items Needed

Step 2

Control Panel Installation

Place and fasten the control panel into the fire pit base cutout.

Step 3

Stainless Steel Heat Barrier Placement

Position the stainless steel heat barrier in the fire pit top opening.

Step 4

Burner Placement

Place the burner on top of the stainless steel heat barrier.

Step 5

Final Assembly Steps

Place propane tank, gems, and glass wind guard to complete the assembly.